Roller Doors Adelaide: Supply and Installation

We supply and install new residential and light-commercial roller doors across metro Adelaide, the Hills and the outer north and south. A single roller door is usually $1,400 to $2,800 supplied and installed and a double $2,400 to $4,500, depending on width, motor and Colorbond colour. Book a free on-site measure through our quote form.

If you’re after new roller doors in Adelaide, we supply and install residential and light-commercial roller doors across metro Adelaide, the Hills and the outer north and south. Roller doors remain the most common new-garage choice in Adelaide because they’re cost-effective, robust and need very little headroom: the curtain rolls up into a coil above the opening rather than running back into the ceiling space. For a carport conversion, a workshop or any garage with a low ceiling, a roller is often the only sensible option.

Tell us your opening size and suburb and we’ll book a free on-site measure, then give you a written, fixed-price quote covering the door, the motor, removal of the old door and installation.

Roller door prices in Adelaide

Roller door cost depends mainly on width, the opener you choose and the finish. As a guide, supplied and installed:

• Single residential roller door: about $1,400 to $2,800
• Double residential roller door: about $2,400 to $4,500
• Opener upgrades: a mid-spec opener with rolling-code remotes, or a smart Wi-Fi opener, adds to the base price. See our garage door installation cost guide for typical add-on ranges.

What pushes a quote up: wide or high openings, non-standard sizes that need a custom curtain, masonry work on the opening, a premium motor, extra remotes or a keypad, and removal of an unusually heavy old door. What keeps it down: a standard opening, a standard Colorbond colour and re-using a healthy motor where it suits the new door.

Why choose a roller door?

• Headroom. A roller door needs only around 300mm of headroom above the opening. A sectional door also needs back-room clearance along the ceiling.
• Cost. Like for like, a roller door usually comes in well under an insulated sectional door.
• Simplicity. Fewer hinges, rollers and panels means fewer things to wear out, which keeps long-term servicing simple.
• Speed. Modern roller door openers lift quickly and quietly, and most can be paired with smart-home apps.

When a sectional might suit you better

Roller doors are single-skin steel, so they don’t insulate. If your garage shares a wall with the house and you use it as a gym, workshop or rumpus space, an insulated garage door or a sectional garage door will hold heat out better through an Adelaide summer and seal more tightly against dust and pests. Sectional doors also give a flatter, more front-of-house look. If you’re unsure, we can price both options on the same visit.

Our roller door installation process

1. Measure and advise. We measure the opening width and height, headroom, side room and the condition of the walls and slab, and talk through colours, motor options and how you use the garage.
2. Written, fixed-price quote. You get one clear quote listing the door, motor, remotes, removal and installation. No surprises on the day.
3. Removal of the old door. We take away the old curtain, drum, brackets and motor if it’s being replaced.
4. Installation. New brackets, axle and curtain go in, the spring tension is set for the door weight, and the side guides are aligned so the door runs straight.
5. Motor commissioning. We set the travel limits and safety force, pair your remotes and show you how to use the manual release in a power cut.

Brands and colour choices

Most roller doors in Adelaide come from a handful of established Australian manufacturers, including Steel-Line, B&D and Gliderol, usually in the standard Colorbond colour range so the door can match your gutters, fascia or roof. We’ll recommend a door and opener combination that suits your opening and budget, with genuine spare parts readily available in Adelaide for future servicing.

Adelaide conditions to plan for

• Summer heat. Dark colours on west-facing doors get very hot in an Adelaide summer, which is hard on motors and anything stored inside. Our guide to garage doors in Adelaide summer heat covers colour and ventilation choices.
• Coastal suburbs. From Henley Beach to Glenelg and down to Aldinga, salt air attacks fixings and bottom rails. Read how to prevent garage door rust near the coast before you choose a finish.
• Hills and bushfire zones. Properties in bushfire-prone areas may need a door and seals that meet the site’s BAL rating. Mention your BAL rating when you request a quote.
• Older homes and carports. Many older Adelaide homes have narrow or non-standard openings. A custom-size curtain is common and is factored into the quote.

Repairs, servicing and commercial roller doors

Already have a roller door that’s noisy, stiff or stuck? Our roller door repairs team handles springs, drums, guides, curtains and motors, and our garage door servicing keeps a new door running smoothly. For shopfronts, warehouses and strata car parks, see commercial roller doors.

Ready to price your new roller door? Request a free quote with your opening size and suburb. You can also read more about the full range of garage door installation in Adelaide if you’re still weighing up door types.

Frequently asked questions

How much does a new roller door cost in Adelaide?

A standard single residential roller door usually runs from about $1,400 to $2,800 supplied and installed. A double roller door is usually $2,400 to $4,500. Width, the motor you choose, Colorbond colour and any changes to the opening move the price within those ranges. We confirm a fixed price after a free on-site measure.

How long does a roller door installation take?

A like-for-like swap on a standard single garage is usually done in half a day. A double door with a new motor, new side rails or opening adjustments can take most of a day. Supply lead time for standard sizes and Colorbond colours is usually short; custom sizes take longer.

Can I keep my existing roller door motor?

Sometimes. If your opener is in good condition, suits the new door's weight and still has parts support, it can often be re-used. Older openers, or ones that have been struggling, are usually worth replacing at the same time so the door and motor are matched.

Is a roller door or a sectional door better?

A roller door suits tight headroom, a lower budget and simple, robust operation. A sectional door suits a garage attached to the house where insulation, sealing and a flatter look matter more. We can price both on the same measure so you can compare.

Do roller doors suit coastal suburbs like Glenelg and Henley Beach?

Yes, with the right finish and maintenance. Salt air speeds up corrosion on fixings, springs and the bottom rail, so a regular rinse and a yearly service go a long way. Ask about coastal-suitable finishes when you request your quote.